VIEWING THE CONFIGURATION ("VIEW CONFIG")
To view the configuration, press the TEST/SELECT switch while "View Config" is displayed in the Main menu. The drive will enter the View Configuration menu which includes the following options:
"View Current" Press the SELECT switch to display the current drive operating parameters. The operating parameters are listed in the table below. Press the MENU switch to select the next option in the View Configuration menu.
"View FW Revs" Press the SELECT switch to display the drive firmware revisions. These include firmware revisions for the DPC, Rws A, and Rws B and Woodi. Press the MENU switch to select the next option in the View Configuration menu.
"View HW S/Ns" Press the SELECT switch to display the serial numbers. These include serial numbers for the Drv SN, Woodi, Rws A, Rws B, Oma A, Oma B, and Dpc. Press the MENU switch to select the next option in the View Configuration menu.
"View HW P/Ns" Press the SELECT switch to display the hardware part numbers. These include part numbers for Woodi, Rws A, Rws B and Dpc. Press the MENU switch to select the next option in the View Configuration menu.
View Configuration Messages
OPTION | CURRENT | DEFAULT FACTORY |
NAME | SETTING | SETTING |
|
|
|
SCSI ID: | # 0 - 7 | 0 |
|
|
|
Parity: | On of Off | On |
|
|
|
Language: | Eng, Frh or Grm | Eng |
|
|
|
Wrt Prot: | On of Off | Off |
|
|
|
Auto Load: | Slot 1 - 6 or MRU | 1 |
|
|
|
Load SW: | On or Off | On |
|
|
|
Rd Ahead: | On or Off | Off |
|
|
|
CDE Curs: | On or Off | Off |
|
|
|
Busy | On or Off | On |
|
|
|
ModSel RA | On or Off | On |
|
|
|
MM SpinUp | On or Off | On |
|
|
|
97653976 F Page 65
