RACK MOUNT CONFIGURATION DE-INSTALLATION

To de-install the LF 6600 Rack Mount configuration:

1)Remove the cabinet trim panel by grasping the panel at the top and pulling outwards. This action pries the ball studs from the keeper holes.

2)Remove the right or left lateral Support Angle that anchors the Chassis to the adjacent cabinet rail by unfastening the two M4 screws and optional standoffs. Remove other fastening hardware anchoring the Support Angle to the rail.

3)Lift the slide releases and pull the LF 6600 all the way out of the cabinet.

WARNING

If two drives have been installed in the rack, ensure that only one drive is extended at a time.

SLIDE LOCKS

SLIDE RELEASES

EP006057

Lift and Pull Slide Releases

PLASMON LASER MAGNETIC STORAGE - LF 6600 User Manual Page 54

Page 54
Image 54
Plasmon LF6600 user manual Rack Mount Configuration DE-INSTALLATION