6)Simultaneously press the LOAD/MENU and TEST/SELECT switches to exit the Configuration mode. Simultaneously press the LOAD/MENU and TEST/SELECT Switches again to move up to the Main menu.
SETTING THE MM SPINUP OPTION
When the enabled, the (Media Management Spin Up) MM SpinUp option allows the LaserDrive to read necessary media management information during spin up. If not enabled, the media management information will recovered on the first media access command.
Perform the following procedure to enable or disable the MM SpinUp option.
1)Enter the Configuration mode by pressing both the LOAD/MENU and TEST/SELECT switches simultaneously.
2)Press the MENU switch until "Set Config" is displayed.
3)Press the SELECT switch to enter the Set Configuration menu.
4)Press the MENU switch until "MM SpinUp:" is displayed.
5)Press the SELECT switch to scroll through the states for the load switch (on, off). When the desired state is displayed, press MENU to enter the state and move to the next option in the Set Configuration menu.
6)Simultaneously press the LOAD/MENU and TEST/SELECT switches to exit the Configuration mode. Simultaneously press the LOAD/MENU and TEST/SELECT Switches again to move up to the Main menu.
PLASMON LASER MAGNETIC STORAGE - LF 6600 User Manual Page 76
