3.Press the stop button to exit the reset display.

Press and hold the stop button to return to the Time of day display.

Returning to your previous maximum value

Start with the display showing Max Spd, Max Cad*, Max Alt or Max Pwr* in the records file.

1.Press and hold the signal/light button to start returning to the previous value. Return OLd appears and the value starts to flash.

2.You can still cancel the reset by pressing the stop button. If you are sure you want to return to the previous value, press OK.

3.Press the stop button to exit the display.

Or, if you want to start resetting your maximum value to zero, press and hold the signal/light button. Reset VALUE starts to flash. Once your have reset the value you cannot retrieve it.

4.You can still cancel the reset by pressing the stop button. If you are sure you want to return to the previous value, press OK.

5.Press and hold the stop button to return to the Time of day display.

*Optional Polar Cadence Sensor or Polar Power Output Sensor required.

E. CONNECTION TO

COMPUTER

There is two-way communication between the wrist receiver and a computer. Polar Precision Performance software offers an easy way to analyse training data. A training log makes it possible to plan future training. Wrist receiver settings are easy to upload from the software instead of entering them manually.

After preparing your settings you can upload options lock to ensure that your settings will not change. You must deactivate the options lock from the “user features” of your software.

Downloading training data to a computer

For IR communication you need an IrDA port and Windows ® 98 operating system or later in your computer.

If you do not have an IrDA port in your computer you need one of the following:

A)an optional Polar IR Interface for RS 232 port and Windows® 95 operating system or later in your computer

or

B)an optional Polar IR Interface for USB port and Windows® 98 operating system or later in your computer.

D 76

E 77