Swapping the displayed exercise information
There are six display options, which you can swap between by pressing the down button. Once you have configured the display options, the recever saves the settings. If the Help function is on, the name of the selected function appears for a few seconds.
Stopwatch | Time of day |
Time of day | Stopwatch |
Current heart rate |
|
Number of the lap |
|
Stopwatch |
|
Lap time | Speed |
Altitude | Power* |
Temperature |
|
Remember to attach your receiver to the Polar Bike mount in order to record the correct temperature.
See the alternative phase displays from “Exercising with Interval Training Set” section. You can also choose which information you want to be on the three display rows.
You can configure the middle and upper rows either in the Measure mode or during the exercise.
Select the middle row information
1.Press the down button to select the desired display alternative. When you swap the middle row information, the upper and lower rows change also. Continue selecting the upper and lower rows.
Select the upper row information
2.Press the up button to select from the following: Time of day (Time), stopwatch (Sw), lap time (Lp), or if you have turned the functions on select from:
calorie expenditure (Cal), trip (Trip), current speed (Spd), average speed (Avg speed), maximum speed (Max speed), cadence* (Cad), altitude (Alt), ascended metres (Asc), output power* (Pwr), left right pedalling balance* (LRB), pedalling index* (PI).
You cannot select the same displayed function to the upper and middle row i. e. the option on the middle row is no longer available for the upper row.
When you have set your Interval Training Set on, you will have one extra display. You can only change the middle and lower rows for this display.
Phase Name Countdown timer
*Optional Polar Cadence Sensor or |
|
Polar Power Output Sensor required. | C 52 |
|
C 53