Appendix I-Polycom Open Collaboration Network (POCN)
Polycom, Inc. I-37
iIn the Outbound Proxy Servers table, the Port field must be set to 5061. (The same
value as entered in Step g.)
For more information see the Polycom Unified Communications Deployment Guide for
Microsoft Environments.
1Set the ITP_CERTIFICATION System Flag to YES.
When set to NO (default), this flag disables the Telepresence features in the Conference
Profile.
2Set the MIN_TIP_COMPATIBILITY_LINE_RATE System Flag.
The MIN_TIP_COMPATIBILITY_LINE_RATE System Flag determines the minimum
line rate at which a Profile can be TIP enabled.
CTS version 1.7 requires a minimum line rate of 1024 kbps and will reject calls at lower
line rates, therefore the System Flag value must be 1024 or higher.
For more information see "Modifying System Flags” on page 22-1.
3If required, manually add and set the FORCE_720P_2048_FOR_PLCM_TIP System Flag
using one of the following values:
FORCE_720P_2048_FOR_PLCM_TIP (Default) - Forces HD 720p video resolution and
a line rate of 2048kbps for all Polycom TIP-enabled endpoints that connect to the TIP-
enabled Telepresence conference. This setting is the recommended setting.
FORCE_2048_FOR_PLCM_TIP - Forces a line rate of 2048kbps for all Polycom TIP-
enabled endpoints connecting to the TIP-enabled Telepresence conference.
NO_FORCE - No forcing is applied and Polycom TIP-enabled endpoints can connect to
the TIP-enabled Telepresence conference at any line rate or resolution.
4Reset the Collaboration Server.
5For more information see "Resetting the Collaboration Server” on page 20-56.
6Register the DMA to the Lync server
For more information see the Polycom Unified Communications Deployment Guide for
Microsoft Environments, “Configure a DMA System SIP Peer for the Lync Server”.
7Register the ITP endpoints to the Lync server