Appendix G-Configuring Direct Connections to the Collaboration Server
Polycom, Inc. G-3
4In the Local Area Connection Properties dialog box, select Internet Protocol [TCP/IP] >
Properties.
5In the Internet Protocol (TCP/IP) Properties dialog box, select Use the following IP
address.
6Enter the IP address, Subnet mask and Default gateway for the workstation.
The workstation’s IP address should be in the same network neighborhood as the
Collaboration Server’s Control Unit IP address.
Example: IP address – near 192.168.1.nn
The Subnet mask and Default gateway addresses should be the same as those for the
Collaboration Server’s Management Network.
The addresses needed for connection to either the Collaboration Server’s Default
Management Network or Alternate Management Network are listed in Table G-1.
For more information about connecting to the Alternate Management Network, see
"Configuring Direct Connections to the Collaboration Server” on pageG-1.
None of the reserved IP addresses listed in Tab le G-1 should be used for the IP Address.