RealPresence Collaboration Server (RMX) 1500/2000/4000 Administrator’s Guide
22-6 Polycom, Inc.
GK_MANDATORY_FOR_CA
LLS_IN
If set to YES, a gatekeeper is required to receive incoming
H.323 calls. If a gatekeeper is not configure in the
Collaboration Server, the calls will fail.
If set to NO (default), gatekeeper is not required to process
H.323 incoming calls and H.323 participants can dial in with
or without a gatekeeper.
GK_MANDATORY_FOR_CA
LLS_OUT
If set to YES, a gatekeeper is required to perform H.323
outgoing calls. If a gatekeeper is not configure on the
Collaboration Server, the calls will fail.
If set to NO (default), gatekeeper is not required to dial out to
H.323 participants and calls can be dialed out with or without
a gatekeeper.
H263_ANNEX_T Set to NO to send the content stream without Annex T and
enable Aethra and Tandberg endpoints, that do not support
Annex T, to process the content.
Default: YES
HD_THRESHOLD_BITRATE Sets the minimum bit rate required by endpoints to connect to
an HD Conference. Endpoints that cannot support this bit rate
are connected as audio only.
Range: 384kbps - 4Mbs (Default: 768)
HIDE_SITE_NAMES From version 7.6.1, in MPMx Card Configuration Mode, this
flag has been replaced by the Enable Site Names option in
the Conference Profile - Site Names dialog box. It allows you
to enable or disable the display of site names in conferences
per conference.
From Version 7.6, in MPM+ Card Configuration Mode, this
flag has been replaced by the Site Names option in the
Conference Properties - Video Settings dialog box. It allows
you to enable or disable the display of site names in
conferences per conference.
In versions prior to 7.6, set this flag to ON to cancel the
display of site names.
When set to ON and the display is disabled, the flag
SITE_NAMES_ALWAYS_ON =YES is ignored.
Default: OFF
Note: This option is unavailable in VSW conferences.
INTERNAL_SCHEDULER When set to NO (default) this flag prevents potential
scheduling conflicts from occurring as a result of system calls
from external scheduling applications such as Polycom
ReadiManager®, CMA™ 4000/5000 and others via the API.
Set to YES to schedule conference reservations using an
external scheduling application.
ISDN_COUNTRY_ CODE The name of the country in which the MCU is located.
Default: COUNTRY_NIL
Table 22-1 System Flags – MCMS_PARAMETERS (Continued)
Flag Description