RealPresence Collaboration Server (RMX) 1500/2000/4000 Administrator’s Guide
I-44 Polycom, Inc.
If the TIP Compatibility Mode was set to Video and Content, the Send Content to
Legacy Endpoints disabled. This setting cannot be changed.
cSet the Telepresence Mode to Auto/On and select the Telepresence Layout Mode.
4Assign the New Profile to the Meeting Room. For more information see "Creating a New
Meeting Room” on page6-4.
5Configure a Virtual Meeting Room (VMR) on the DMA.
The procedures for configuring DMA are described in detail in the Polycom Unified
Communications Deployment Guide for Cisco Environments.
Resolution Configuration
The resolution configuration dialog box is not applicable to TIP-enabled conferences as it
uses fixed settings:
• HD720p 30 - for Line rates of 1024kbps up to 3Mb
• HD1080p 30 - for Line rates of 3Mb and higher