Chapter 16-Network Services
Polycom, Inc. 16-65
All the flags must be manually added to this dialog box. For a detailed description of
the flags and how to add them, see "Manually Adding and Deleting System Flags” on
page22-19.
The following flags can be defined per service:
—ALLOW_NON_ENCRYPT_PARTY_IN_ENCRYPT_CONF
—ENABLE_H239
—SIP_ENABLE_FECC
—ENABLE_CLOSED_CAPTION
—ALLOW_NON_ENCRYPT_RECORDING_LINK_IN_ENCRYPT_CONF
—NUMERIC_CONF_ID_LEN
—NUMERIC_CONF_ID_MIN_LEN
—NUMERIC_CONF_ID_MAX_LEN
—ENABLE_CASCADED_LINK_TO_JOIN_WITHOUT_PASSWORD
—MAX_CP_RESOLUTION
—QOS_IP_AUDIO
—QOS_IP_VIDEO
—QOS_IP_SIGNALING
—ENABLE_CISCO_GK
—SIP_FREE_VIDEO_RESOURCES
—FORCE_CIF_PORT_ALLOCATION
—MS_ENVIRONMENT
—SIP_FAST_UPDATE_INTERVAL_ENV
—SIP_FAST_UPDATE_INTERVAL_EP
—H263_ANNEX_T
—H239_FORCE_CAPABILITIES
—MIX_LINK_ENVIRONMENT
—IP_LINK_ENVIRONMENT
—FORCE_STATIC_MB_ENCODING
—FORCE_RESOLUTION
—SEND_WIDE_RES_TO_IP
—DISABLE_WIDE_RES_TO_SIP_DIAL_OUT
—SEND_SIP_BUSY_UPONRESOURCE_THRESHOLD
5Click the Routers tab.
6Define the routers used in this network and that are other than the routers defined in
the Management Network. The field definitions of the Routers tab are the same as for
the Default Management Network. For more information see "Click the Routers tab.” on
page16-14.
Flags defined per Network Service override their general definition in the System Configuration.