Chapter 22-System Configuration Flags
Polycom, Inc. 22-29
FORCE_STATIC_MB_ENCO
DING
This flag supports Tandberg MXP mode of sending and
receiving video by IP endpoint in HD 720p resolution and
Video Quality set to Motion. This mode is not supported for
ISDN endpoints.
Default value: Tandberg MXP.
To disable this flag, enter NONE.
G728_IP Enables or disables declaration of G.728 Audio Algorithm
capabilities in IP calls.
Range: YES / NO
Default: NO
G728_ISDN Enables or disables declaration of G.728 Audio Algorithm
capabilities in ISDN calls.
Range: YES / NO
Default: NO
H239_FORCE_CAPABILITIE
S
When the flag is set to NO, the Collaboration Server only
verifies that the endpoint supports the Content protocols: Up
to H.264 or H.263.
When set to YES, the Collaboration Server checks frame rate,
resolution and all other parameters of the Content mode as
declared by an endpoint before receiving or transmitting
Content.
Default: NO.
H264_BASE_PROFILE_MIN
_RATE_CIF60_MOTION
Not supported from Version 7.0.2.
Prior to Version 7.0.2, this flag set the minimum bitrate
threshold for endpoints that did not support H.264 High Profile
for CIF60 resolution using Motion Video Quality.
Default: 256kbps
H264_BASE_PROFILE_MIN
_RATE_HD1080P30_SHARP
NESS
Not supported from Version 7.0.2.
Prior to Version 7.0.2, this flag set the minimum bitrate
threshold for endpoints that did not support H.264 High Profile
for HD1080P30 resolution using Sharpness Video Quality.
Default: 1536kbps
H264_BASE_PROFILE_MIN
_RATE_HD720P30_SHARP
NESS
Not supported from Version 7.0.2.
Prior to Version 7.0.2, this flag set the minimum bitrate
threshold for endpoints that did not support H.264 High Profile
for HD720P30 resolution using Sharpness Video Quality.
Default: 1024kbps
H264_BASE_PROFILE_MIN
_RATE_HD720P60_MOTION
Not supported from Version 7.0.2.
Prior to Version 7.0.2, this flag set the minimum bitrate
threshold for endpoints that did not support H.264 High Profile
for HD720P60 resolution using Motion Video Quality.
Default: 1536kbps
Table 22-2 Manually Added System Flags – MCMS_PARAMETERS (Continued)
Flag Description