Polycom 1 manual Setting Description Use Gatekeeper, Gatekeeper IP, Address, PathNavigator for

Networks

To configure the system to use a gatekeeper:

1.Go to System > Admin Settings > Network > IP > H.323 Settings.

2.Select and configure these settings on the Gatekeeper screen:

Setting	Description
Use Gatekeeper	Specifies whether to use a gatekeeper. Gateways and
	gatekeepers are required for calls between IP and ISDN.
	•	Off — Calls do not use a gatekeeper.
	•	Auto — System attempts to automatically find an
		available gatekeeper.
	•	Specify — Calls use the specified gatekeeper. Enter the
		gatekeeper’s IP address or name (for example,
		gatekeeper.companyname.usa.com, or 10.11.12.13).
H.323 Name	Specifies the name that gatekeepers use to identify this
	system. You can make point-to-point calls using H.323
	names if both systems are registered to a gatekeeper.
	The H.323 Name is the same as the System Name, unless
	you change it. Your organization’s dial plan may define the
	names you can use.
H.323 Extension	Lets users place point-to-point calls using the extension if
(E.164)	both systems are registered with a gatekeeper, and specifies
	the extension that gatekeepers and gateways use to identify
	this system.
	The default H.323 Extension is based on the system serial
	number, but it can be changed. Your organization’s dial plan
	may define the extensions you can use.
Gatekeeper IP	If you chose to use an automatically selected gatekeeper,
Address	this area displays the gatekeeper’s IP address.
	If you chose to specify a gatekeeper, enter the IP address.
Use	Lets you specify whether multipoint calls use the system’s
PathNavigator for	internal multipoint capability or the Polycom PathNavigator™
Multipoint Calls	Conference on Demand feature. This feature is available only
	if the system is registered with a PathNavigator gatekeeper.
3. If you chose to specify a gatekeeper, select			to specify Alternate

Gatekeepers that the system can use if the primary gatekeeper is not available.

2 - 5