Polycom 1 manual Setting Description Video Format, Content

Administrator’s Guide for Polycom HDX Systems

Setting	Description
Video Format	Specifies the monitor’s format:
	• DVI — Select if the monitor is connected to the DVI connector
	using a DVI cable. DVI resolutions can be 1024 x 768 or 1280
	x 720.
	• VGA — Select if the monitor is connected to the DVI
	connector using a VGA cable. VGA resolutions can be 1024 x
	768 or 1280 x 720.
	• Component YPbPr — Select if the monitor is connected to
	the DVI connector using component cables.
	• S-Video— Select if the monitor is connected to the BNC
	connectors using an S-Video cable.
	• Composite — Select if the monitor is connected to the BNC
	connectors using a composite video cable.
	Note: If you select 16:9, you will also need to set up the monitor
	for full-screen display. In the monitor’s setup menu, choose the
	setting that stretches the picture uniformly without clipping the
	edges, which is usually called Full, Wide screen, or 16x9.
	Use this setting:	Not this setting:

Resolution	Specifies the resolution for the monitor.
Output Upon	Specifies the screen saver output for Monitor 2:
Screen Saver	Specifies whether black video or no signal is sent to the monitor
Activation	when the system goes to sleep and the screen saver activates.
	Select Black if you want to display black video. This is the
	recommended setting to prevent burn-in for TV monitors.
	Select No Signal if you want the display to react as if it is not
	connected when the system goes to sleep. This is the
	recommended setting for VGA monitors and projectors.
Display Near	Specify whether to display near video on this monitor.
Video
Display Far	Specify whether to display far video on this monitor.
Video
Display	Specify whether to display content on this monitor.
Content

3 - 4