Proxima ASA 4100/4200 manual 9VGA connections

VGA Cable

To COMPUTER IN

From

MONITOR OUT

Figure 2-9VGA connections

1Unplug the monitor cable from the computer.

2Plug the end of the supplied VGA cable with the large round collar into the COMPUTER 1 IN port on the projector. Plug the other end of the VGA cable into the computer's Video Out (VGA) port.

3Connect your audio source to the COMPUTER 1 AUDIO inputs on the projector.

NOTE: If you are using a second computer video or audio source, plug their

outputs into the COMPUTER 2 IN and COMPUTER 2 AUDIO connectors.

4If you want to use an external monitor, connect the monitor cable to the MONITOR OUT port of the projector.

5Turn the projector on and press the key.

NOTE: An external monitor is not required to use the DP4100/4200.

Setting Up the Desktop Projector™ 4100/4200 2-7