2-14
Chapter Two
The optional Cyclops interactive pointer system is shipped with its own
Installation and User’s Guides. The Cyclops kit also includes extra cables to
connect the projector and the computer.
1Connect one end of the appropriate serial cable to the projector’s
CYCLOPS port.
2Connect the other end of the cable to the computer:
• On a PC, connect the computer end to a serial port.
• On a Macintosh, connect the computer end to an ADB connector.
Projector Audio Out
The projector contains an internal stereo system consisting of an amplifier
and two speakers. Although this system provides high-quality stereo output,
a multimedia presentation may require independently powered speakers or
an external sound system.
NOTE: The projector’s internal speakers can be turned on or off using the
Audio menu (see page 3-24).
Video Out
Audio Out
Figure 2-20 The Audio Out port
To connect your projector to an external stereo system:
1Insert the RCA jacks of the stereo system speaker composite video/audio
cable into the projector’s AUDIO OUT ports.
2Insert the RCA jacks at the other ends into the external amplifier or
powered speaker system’s left and right AUDIO IN ports.
NOTE: A mini-jack to RCA adapter is provided (see page 1-2) in case your
external speaker system has a mini-jack plug.