PT40 Communication

3.The Falcon PT40 can hold up to four applications. Choose the location where you want to load your new application.

Once you select a location, your application is downloaded.

If there was previously an application in the location you select, that application will be removed and replaced with a new application.

Specialized Download Situations

If you are downloading a program file to several portables, or if you switch between two or more programs in a portable, you can save time by downloading the program's compiled file, rather than recompiling the source file each time.

To do so, launch the PPGXFER directly from Windows via Start > Programs > PT Program Generator > PPGXFER. Once you're in the PPGXFER window, use the File > Open command to select your previously compiled *.hex file. Once you select the file, downloading begins immediately.

Using XFER32

XFER 32 is the application used to send and receive files to and from the PDT. When you start XFER32, the XFER32 user interface, shown in Figure 64, opens.

Figure 64. XFER32 User Interface

XFER32 Setup

To prepare for data transfer between the PC and the PDT, click on the Setup button to open the Setup dialog box, which contains three tabbed sections:

92

PT Program Generator (PPG) v5.0