PSC PT Program Generator Verifying Input Size

Example Frames

6. Displays the result (pass/fail).

Figure 114. Displays Pass or Fail

Output Fail

Output Pass

Verifying Input Size

To verify that a scanned or entered code is a given number of characters or within a given range, use the Size to Register option in the Input node collecting the data. This option stores the number of characters of the given input in a separate register, which can then be checked with a Verify node.

This example is illustrated in Tip05.scr, which is shown in Figure 115 on page 143.

142 PT Program Generator (PPG) v5.0