PPG Tutorial

When creating the Links from the Output: to PC node, create the Link to the Output: Error Beep node first. This Link will be selected for the Next Node/On Error option.

The Menu: Confirmation Node

Complete the following steps to set up this node:

1.Double-click on the Menu: Confirmation node to open its dialog, and enter the text shown in Figure 95. Leave the second line blank.

Figure 95. The Menu: Confirmation Dialog

2.Enable the <F3> checkbox. Select Output to PC in the Next Node column to begin data output when the user presses <F3>.

3.Select the <F4> checkbox, and select Exit Main Menu from the pull-down list. This will redisplay the Main Menu when the user presses <F4>.

4.Press OK to save your settings and exit the dialog box.

The Output: to PC Node

Complete the following steps to set up this node:

1.Select the Output: to PC node to open its dialog (refer to Figure 96 on page 123).

2.On the Information to Output tab, select the Serial setting for Output To Device. This will send the output to the serial port of the portable, which should be connected to the serial port of the PC.

122

PT Program Generator (PPG) v5.0