
Example Frames
Verify: DNLD Checks to see if <F3> was pressed and, if it was, continues to the Display node. If <F3> was not pressed, the program loops back to the Input node and waits for further input.
Display: WAIT Displays Downloading, Please Wait on the portable’s screen.
Input: TO FILE Starts downloading the file. Options in its dialog box are set as shown in Figure 119 on page 146.
Figure 119. The Input: TO FILE Dialog
Display: DONE | If downloading is successful, Display: DONE displays DOWNLOAD |
| DONE; <F3>= MORE; <F4>=QUIT on the portable’s screen. |
Display: | If downloading is unsuccessful, Display: TIMEOUT displays TIME- |
TIMEOUT | OUT EXCEEDED; <F3>=TRY AGAIN; <F4>=QUIT on the por- |
| table’s screen. |
Input: FKEY | Both these Display nodes loop back to the Input: FKEY node, which |
| accepts the user’s function key input. |
To download a file to a portable, set options for the Input node as follows:
Serial | Selected for the Input From option. |
Time Out | Selected for the Input From option. Should Link to a Display node |
| that prompts the user to try again. |
Destination | Set to the desired file. Choose to replace existing data or place new |
| data at the beginning or end of the file or at a given record number. |
Echo to Display | Enabled so that the user can see the file going into the portable unit. |
146 | PT Program Generator (PPG) v5.0 |