Using XFER32
Figure 66. Transfer Tab of the File Transfer Utility
Sender Timeout (Seconds)
Receiver Timeout
Path/Filename Transmission
Overwrite
Enter the maximum number of seconds to wait for a connection when sending files. A value of 0 waits indefinitely.
Enter the maximum number of seconds to wait for a connection when receiving files. A value of 0 waits indefinitely.
NOTE: ZModem Protocol is NOT supported by the Falcon PT40. This feature is only available with ZModem protocol.
Select to determine the action the receiver takes when a received file already exists.
Source Longer or Newer
CRCs Don’t
Match
Append
Always
Source Newer
Date/Length
Don’t Match
Never
File Transfer Default
Overwrites the existing file if the received file is longer or newer.
Overwrites the existing file if the CRCs of both files don’t match.
Appends the received file to the existing one.
Overwrites the existing file with the one received.
Overwrites the existing file if the received file is newer.
Overwrites the existing file if the dates or lengths of both files don’t match.
Skips the transfer if the received file already exists.
Enter the File Transfer Default folder for storing received files. Use the Browse button to locate a new location.
User’s Guide | 95 |