Error Messages
Error Messages | Description | |
|
| |
Portable successfully | The application was successfully downloaded to the PDT. | |
programmed | ||
| ||
|
| |
BEL received - Aborting. |
| |
|
| |
No response - Aborting. | These errors indicate that PPGXfer received an unexpected | |
| ||
Too many NAKs - Aborting | response from the PDT. Reset the PDT and try the download | |
| again. | |
Unknown response - | ||
| ||
Aborting. |
| |
|
| |
COM port error |
| |
|
| |
Open COM error | These errors indicate problems communicating with the PDT | |
| ||
Set COM state error | ||
via the serial port. Make sure the cable is securely connected | ||
| to both the PC and the PDT. Verify that the correct serial port | |
TimeOut exceeded | ||
has been selected and that the serial port is functioning. | ||
| ||
WriteComm error - | ||
| ||
Aborting. |
| |
|
| |
| This error indicates that the application was created for a dif- | |
PDT does not support | ferent PDT than you are downloading to. Open the applica- | |
tion .scr file in PPG. Select the File > Customize | ||
application file. Recompile | ||
for Falcon PT40. | Application command and select the correct PDT type. | |
Save the application and select File > Download to com- | ||
| ||
| pile the file and download it to the PDT. | |
|
| |
User aborted | The user aborted the download process. | |
|
|
User’s Guide | 177 |