PSC PT Program Generator Upgrading to PPG, Uninstalling PPG, Launching PPG, Launching and Exiting PPG

Getting Started

7.Finally, a message that PPG has been successfully installed is dis- played.

8.Press Finish to exit the installation.

Upgrading to PPG v5.0

If you want to upgrade to PPG v5.0, complete the instructions in Installing PPG on page 7. By default, PPG v5.0 is installed in a different default location on your PC’s hard drive than PPG v4.5, so it is possible to have both versions installed at the same time.

Prior PPG version source files (*.scr) are converted when you open and save them in PPG v5.0. To maintain PPG v4.5 compatible applications, open them in PPG v5.0 and save them with a new name or new location.

There is no keyboard wedge support in PPG v5.0. Applications created in previous versions of PPG that use the keyboard wedge option can be saved in PPG v5.0, but they must be updated with a new input method after you save them.

Uninstalling PPG

To uninstall PPG, use the standard method of removing programs installed on Microsoft Windows:

1.From the Windows Start menu, select Settings > Control Panel > Add/ Remove Programs.

2.At the Add/Remove Programs window, select Change or Remove Pro- grams along the left side of the window.

3.Scroll down the screen until you locate PT Program Generator and

select it by clicking on it with your mouse.

4. Press Change/Remove to initiate the program removal process.

Launching and Exiting PPG

Launching PPG

To launch PPG, complete the following steps:

1.Select PPG from your Windows Start Menu > PT Program Generator > PT Program Generator.

8 PT Program Generator (PPG) v5.0