Creating & Using Nodes

Store Info Tab

Data Destination specifies where to store the input data.

Figure 37. Input Node: Store Info Tab

To specify placement of the data in a register (refer to Using a Register as a Destination on page 79), select Register in the Data Destination pull-down list. To store the data in one field of the register, select Field from the Write Type pull-down list. Specify or define a template, and select the field (refer to Creating a Template on page 85).

To store the data in a file, select File from the Data Destination pull-down list, and select a file from the File pull-down list. You can choose to insert the data before a given record in the file, replace a given record, or insert the data in alphabetic or numeric order (refer to Files on page 81).

Output Nodes

Output nodes send data to the portable’s display, serial port, or system soft- ware.

60

PT Program Generator (PPG) v5.0