Building a Custom Portable Program

The Output: Error Beep Node

Now you need to set the Output node to sound a beep. Complete the following steps:

1. Double-click the Output: Error Beep node to display its dialog box.

Figure 91. The Output: Error Beep Dialog Box

2.On the Information to Output tab, select System as the Output To

setting and Constant as the Data Source setting.

•In the constant field, enter the characters .+ (period and plus). This is the command to sound a high beep.

•Or enter .– to sound a low beep.)

3.Press OK to save your settings and exit the dialog box.

The Display: Error Text Node

You can have a special message appear when the error beep is sounded.

Double-click on the Display: Error Text node, enter the text shown in Figure 92, and press OK.

Figure 92. The Display: Error Text Dialog Box

User’s Guide

119