Creating New Nodes

Figure 43. The Copy Node Properties Dialog

Copy From Tab

Data Source indicates the data to be copied—either a constant or the contents of a register or file. If you choose Constant, you are prompted for a number or text string. If you choose Register or File, you are prompted to specify a loca- tion. For more information, refer to Registers on page 78 and Files on page 81.

Copy To Tab

Data Destination indicates where the data is copied. Data can be copied to either a register or a file. Select the destination from the available options. For more information, refer to Using a Register as a Destination on page 79 and Using a File as a Destination on page 83.

Next Nodes

Next node specifies the next operation to go to when the verify function succeeds or fails.

Modify Nodes

Modify nodes let you change the contents of a register or file. You can switch text to all uppercase or all lowercase, reverse the order of data, or delete data. You can also perform a search-and-replace operation on data and clear the eighth bit of data. Figure 44 on page 68 shows the dialog box for a Modify node.

User’s Guide

67