Troubleshooting
Error Message | Description | |
|
| |
| An error occurred while reading the source file. Make sure | |
| you selected the correct source file. Open the file with PPG | |
| and verify that it appears as expected. If the message per- | |
Error with <source file | sists, contact PSC Technical Support for assistance. | |
Your program may have too many nodes in a frame or have | ||
name> | ||
too many fields defined in a template. | ||
| ||
| The application may be too large or complex for the available | |
| memory in the compiler. Using PPG, modify your application | |
| to make it smaller and try compiling again. | |
|
| |
Language not supported | This version of PPGComp does not support the selected lan- | |
guage. Contact PSC Technical support for assistance. | ||
| ||
|
| |
| This message indicates an error in the source file. It usually | |
| means that some required information is missing. Determine | |
Syntax Error in <node | which node is the problem, open the application with PPG, | |
locate the problem node and view its properties. Make sure | ||
name>(line <line #>) | ||
all required options are selected. Save the application and | ||
| ||
| select | |
| tion. | |
|
| |
| PPGXfer Error Messages | ||
Table 8. PPGXFER Error Messages | ||
|
| |
Error Messages | Description | |
|
| |
Application is too large to | The application is too big to be stored on the PDT. The down- | |
load, it must be < FFFFH. | load cannot be completed. Using PPG, modify your applica- | |
tion to make it smaller and try downloading again. | ||
| ||
|
| |
| This error occurs when insufficient memory exists to run | |
Buffer allocation error | PPGXfer. Close other applications and try again. If no other | |
applications are open, you may need to reboot your PC | ||
| ||
| before trying again. | |
|
| |
| This error indicates that the selected hex file could not be | |
Error opening hex file | opened. Make sure that the file exists and it is not currently | |
| being used by another application | |
|
| |
NAK received - | This error indicates that PPGXfer received an unexpected | |
response from the PDT. PPGXfer will try again without any | ||
further action from the user. | ||
| ||
|
| |
176 | PT Program Generator (PPG) v5.0 |