Building a Custom Portable Program

3.Create all the nodes shown in Figure 84 on page 114, using commands on the Create menu or icons on the Toolbar. Each node's type is indi- cated by the first line of text in the node. Rename each node accord- ing to the second line of text. Link the nodes together as shown.

If you click twice on the Start or Exit node, this frame will move to the background window. Clicking on any visible part of the Collect Data frame will bring it to the fore- ground.

When Linking the Verify: Input node, create the Link to the Output: Error Beep

node first. Then create the Link to the Copy: To File node. This will place the correct

Link in the Next node options of the Verify: Input node.

The Display: Enter Item Node

You need to set up this node to display “Enter Item:” on the first line of the portable’s screen and have the fourth line of the screen tell the user to press <F4> to return to the Main Menu. Complete the following steps to set up the node:

1.Double-click the Display: Enter Item node to open the node’s dialog box (refer to Figure 85 on page 115).

2.Type Enter Item: on the first line of the text entry area.

3.Use the keyboard navigation keys to move to the fourth line and enter

Menu.

4.Select OK to save your settings.

Figure 85. The Display: Enter Item

The Input: Item Node

Complete the following steps to set up this node:

1.Double-click the Input: Item node to display its dialog box (refer to

Figure 86 on page 116).

User’s Guide

115