
Building a Custom Portable Program
Figure 96. The Output To: PC Dialog Box
3.From the Data Source
4.On the Next Nodes tab, select Display Successful from the
Next Node field and Output Error Beep from the On Error field.
5.Press OK to save your settings and exit the dialog box.
The Output: Error Beep Node
Complete the following steps to set up this node:
1.Select the Output: Error Beep node to open its dialog box.
2.On the Information to Output tab, select System as the Output To setting and Constant as the Source setting.
3.Enter .+ in the Source
4.On the Next Nodes tab, select Menu Error Text for both fields.
5.Press OK to save your settings and exit the dialog box.
The Menu: Error Text NodeComplete the following steps to set up this node:
1.Select the Menu: Error Text node and enter the text shown in Figure 97.
2.Enable the <F3> checkbox and select Output to PC from the
User’s Guide | 123 |