PSC PT Program Generator Data to Modify, Modification Type

Creating & Using Nodes

Figure 44. The Modify Node Properties Dialog

Data to Modify

Data source specifies the location of the data to modify. If you choose Register, select a register from the displayed Register list box. To modify only one field of the register, select the Field type and select the Template and Field name from the displayed list boxes (refer to Registers on page 78).

If you choose File, select the file name from the pull-down list. If you select Record, refer to Using a File as a Source on page 82.

Modification Type

This option allows you to select how the data is modified. Select from the fol- lowing:

To Upper case Changes all lowercase characters in the source string to uppercase.

To Lower case Changes all uppercase characters in the source string to lowercase.

Search \ Replace Replaces all instances of a given string with a second given string.

You must use the entire string; it is not possible to do a partial match using a the Search/ Replace feature on the Modify node. To use a partial match, refer to Searching for a Partial Match on page 148 using the Verify node.

68 PT Program Generator (PPG) v5.0