PSC PT Program Generator Appendix D PPG System Commands

Appendix D PPG System Commands

Overview

To use PPG to reset the default settings on the PDT, enter the human readable portion of these bar codes at the system command prompt. This is useful to automatically change modes for the user. The following bar codes are provided in this section:

•Using Predefined Defaults on page 164.

•Alternate Parameters on page 165.

Additional setting bar codes are provided in the Programming chapter in the PSC Falcon PT40 Product Reference Guide. Enter the human readable portion at the system command prompt in the Output node Properties dialog.

Figure 130. System Command Field in the Output Node

User’s Guide 163