
Getting Started
PPG Tutorial
To become familiar with PPG, complete the PPG Tutorial on page 99, or access the PPG Tutorial via the
Program Files
Executable Programs
Following is a list of executable programs that are installed on your PC during the installation of PPG:
PPG | PPG is the PT Program Generator application. This is the application you |
| use to create programs for a PSC portable. |
PPGXFER | PPGXFER is used to transfer the program you created in PPG to the porta- |
| ble. This utility is called automatically by PPG when you download a program |
| to the portable. Refer to Downloading the Application to the PDT on page 89 |
| |
PPGComp | PPGComp (PPG Compiler) is used to compile the program you created into |
| the format which is downloaded to the PDT. This utility is called automatically |
| by PPG when you download a program to the portable. Refer to Download- |
| |
XFER32 | XFER32 is used to transfer data between a PC and the portable. After you |
| input data or scan bar codes with the portable, you can use this utility to |
| upload the data into a file on your PC. You can also use it to download infor- |
| mation stored in a PC file into the portable. Refer to Using XFER32 on |
|
Sample Program Files
PPG comes with four sample files. Some of these files are just portions of programs demonstrating use of a specific node. However, you can use any of these samples as a foundation for building a
sample.scr sample.scr allows you to collect information with your portable, upload collected data to a PC, and erase collected data. You will be using this file as you work through PPG Application Design on page 15 and the PPG Tutorial on page 99.
sample2.scr sample2.scr is a simple but complete
10 | PT Program Generator (PPG) v5.0 |