
Example Frames
Location
Asset #
Date
Time
Example data:
Room 1,12345,2/24/2003,13:39:53
Room 1,12346,2/24/2003,13:39:58
Room 2,12347,2/24/2003,13:45:33
Room 2,12348,2/24/2003,13:39:43
If duplicate Asset #'s are to be disallowed, the Asset # must be looked up in the second field and, if found, display a message and disallow the entry. Enter “12347” at the Asset # prompt and store it in the Default Register field Asset #, copy Asset # to the Lookup register, insert “~,” on the front of the entry and append “,*” onto the end of the entry so the result is:
~,12347,*
Use the Lookup register in a Verify node as the comparison type against the to determine the existence of a duplicate record.
To search for a data in a file, complete the following steps:
1.Input Asset # into Default Register Asset # field
2.Copy the Default Register Asset # field to the Lookup register
3.Copy insert “~,” onto the front of the Lookup register
4.Copy append“,*” to the Lookup register
5.In the Verify node, Verify Information Type and File as the File =
tab, select File as the Data type.
6.In the Verify node,
Register as the type.
Verify Options tab, select ASCII as the Data type, Comparison type, and Lookup as the Register
150 | PT Program Generator (PPG) v5.0 |