PSC PT Program Generator Specifying a Register Field

Managing Data

Write Type

To select how the data is stored in the register, select the write type from one of these options:

Insert	Insert places the data at the beginning of the register, before any
	existing data.
Overwrite	Replace replaces any data previously stored in the register.
Append	Append adds the data to the end of the register, after any existing
	data.
Field	Field stores the data in a specified field of the register (refer to
	Specifying a Register Field on page 80).

Specifying a Register Field

If you enable the Field checkbox for the Register Source or select Field as the Write Type in a Register Destination, the template and field pull-down lists become available. (refer to Figure 54).

Figure 54. Template and Field pull-down lists

•Select the template you want to use from the Template pull-down list, and then select the field.

•To create a new template, select the New Template button (refer to

Creating a Template on page 85).

80 PT Program Generator (PPG) v5.0