PSC PT Program Generator Alternate Parameters

Alternate Parameters

Alternate Parameters

Enter these commands by scanning the bar codes with the PT40’s laser or through the PC’s serial port. You can also embed these codes in a PPG applica- tion.

The Falcon PT40 recognizes the bar code commands in Table 4 on page 165.

Table 4. Scannable Bar Codes of Alternate Settings for the PT40

Scannable Bar Codes of Alternate Settings for the PT40

Setting Name	Bar Code							Description
Clear Mode								Has the same effect as the <CLR> key
		*	-	-	*
Character								Has the same effect as the <CLR> key for the last
Clear Mode								character entered.
		*		-	+		*
Receive File								Prepares the portable to accept a program.
Mode
		*	/			.	*
Low Beep								Sounds a low beep on the portable.
Mode
		*				-	*
High Beep								Sounds a high beep on the portable.
Mode
		*			+		*
								Retrieves data if the application program stops
Retrieve Data								execution and gives the PROGRAM FAILED
								message. Connect the portable to the PC and start
Mode								the communications program on the PC, then scan
		*	$		$		*	this bar code. The data will transmit, one file at a
								time.

User’s Guide 165