Creating New Nodes

Figure 35. Input Node: Track Size Tab

An Input Size register is predefined for your convenience.

Display Tab

The Echo to Display option determines whether the received data is displayed on the portable’s screen.

Figure 36. Input Node: Display Tab

When this option is selected, you are prompted to specify how and where data is displayed. You can select either the current cursor location or a specific posi- tion. Selecting the current cursor position may cause the data display to vary.

Selecting a screen position allows you to specify an exact starting position.

The default settings (0 for both row and column) start the display in the top-left corner of the screen. The rows and columns are numbered starting with 0; the first row is 0, the second is 1, and so on. Specify rows 0 through 5 and columns 0 through 15 on a PT40.

The clearing option allows you to further control the display. To remove existing data from the line on which the input data is displayed, select either To end-of-lineor Count. Select the appropriate option for the data you expect to receive.

The echoed input is left on the screen until you display something else.

User’s Guide

59