Cascade Topology

Cascade Zoning

Sanbox Switch chassis support fabric-wide zones for all zone types. Broadcast Zones and Name Server Zones require no special consideration in a cascade fabric. That is, you may assign these zones on a user-port-by-user-port basis and T_Ports are not zoned.

Hard Zones, however, require zoned T_Port interconnections between chassis which contain ports in the same Hard Zone. That is, if a particular Hard Zone is distributed across chassis boundaries, each piece of that Hard Zone and its inter- connecting T_Ports must be assigned to the same Hard Zone number. This makes interconnections between pieces of the same Hard Zone much like the interconnec- tion of chassis.

NOTE:

Also, remember that mixing of topologies is not allowed. If the topology of the chassis is Cascade, then the interconnection of the Hard Zones must also be accomplished in Cascade topology.

MKII Compatibility

SANbox fabrics do not support MKII chassis in cascade topologies.

5-8Multi-Chassis Fabrics

 

SANbox-16HA Fibre Channel Switch

59005-03 Rev. A

Installer’s/User’s Manual

Page 92
Image 92
Q-Logic 16HA user manual Cascade Zoning, Mkii Compatibility