Q-Logic 16HA user manual Installation, 59005-03 Rev. a Installer’s/User’s Manual

Power Switches 1-19

Test Mode Switch 1-19

Front Panel LEDs 1-20

Heartbeat LED (Yellow) 1-20

Switch Logic Power Good LED (Green) 1-20

Power Supply Fail LED (RED) 1-20

Over Temperature LED (Red) 1-21

Logged-In LED (Green) 1-21

Traffic LED (Yellow) 1-22

AC Input Power Connectors and Fuses 1-22

Switch Management Connector 1-22

Chassis Back 1-23

Power Supply(s) 1-24

Back Panel Lights 1-24

2Installation

Introduction 2-1

Unpack 2-1

Place or Mount the Equipment 2-2

Shelf Mount 2-2

Rack Mount 2-2

Apply the IEC Class 1 Laser Information Label (If the installation is in Europe) 2-4

Install GBICs 2-5

Connect to AC Power 2-5

Switch Logic Power Good LED 2-7

Check the Power-On-Self-Test (POST) Results 2-7

Cable Fibre Channel Devices to the Switch 2-8

Public Devices 2-8

Private Devices 2-8

Mixing Public and Private Devices on the Same Loop. 2-9

Switch Ports 2-9

Tuning 2-9

Distance 2-10

Port Buffer Credits 2-10

Hot-Pluggable 2-11

Incorrect Cabling 2-11

Connections 2-11

Examples 2-12

Configure the Chassis 2-17

Configure the Ports 2-18

Fabric Ports 2-18

SL_Ports 2-18

iv		SANbox-16HA Fibre Channel Switch
	59005-03 Rev. A	Installer’s/User’s Manual