A
5 – Diagnostics/Troubleshooting Recovering a Switch Using Maintenance Mode
5.Select option 1 from the maintenance menu. When prompted for a file name prompt, enter the firmware image file name.
Image filename: filename
Unpacking ’filename’, please wait...
Unpackage successful.
6.Select option 7 to reset the switch and exit maintenance mode.
5.5.3
Resetting the Network Configuration in Maintenance Mode
This option resets the network properties to the factory default values and saves them on the switch. Refer to SANbox 5000 Series Fibre Channel Switch Command Line Interface Guide for the default network configuration values.
5.5.4
Resetting User Accounts in Maintenance Mode
This option restores the password for the Admin account name to the default (password) and removes all other user accounts from the switch.
5.5.5
Copying Log Files in Maintenance Mode
This option copies all log file buffers to a file on the switch named logfile. You can use FTP to download this file to the management workstation. You must download the logfile before resetting the switch. Refer to the SANbox 5000 Series Fibre Channel Switch Command Line Interface Guide for information about downloading files from the switch.
5.5.6
Removing the Switch Configuration in Maintenance Mode
This option deletes all configurations from the switch except the default configuration. This restores switch configuration parameters to the factory defaults. Refer to Reset command in the SANbox 5000 Series Fibre Channel Switch Command Line Interface Guide for the factory default values.
