Q-Logic 5000 manual Configure the Switch, Configuration Wizard Prompts

4 – Installation Installing a Switch

S

4.2.6

Configure the Switch

You can configure the switch using the CLI, QuickTools, or Enterprise Fabric Suite 2007. Enterprise Fabric Suite 2007 is an optional, full fabric graphical user interface that comes with a 30-day trial license. Refer to the SANbox 5000 Series Enterprise Fabric Suite 2007 User Guide for information about installing Enterprise Fabric Suite 2007.

To log in and configure the switch using QuickTools, do the following:

1.Open an Internet browser and enter the default IP address 10.0.0.1 to start the QuickTools web applet.

2.Log in to the switch using the default user name (admin) and password (password).

3.Obtain the IP address and subnet mask from your network administrator.

4.Open the QuickTools Wizards menu and select Configuration Wizard. Follow the instructions to set network parameters and the password. Changing the IP address will terminate the QuickTools session.

5.Open an Internet browser again and log in with the new IP address.

The Configuration wizard prompts you for the following configuration information:

Table 4-2. Configuration Wizard Prompts

Temporary IP address

Temporary subnet mask

Archive template file

Switch domain ID (1–-239)

Domain ID Lock (Locked/Unlocked)

Switch name

Permanent IP address

Permanent subnet mask

Permanent gateway address

Permanent network discovery method

Date and time

Admin account password

Create a configuration archive?

4-14 59096-04 A