Q-Logic 5000 manual Introduction

Section 1

Introduction

This manual describes the features and installation of the SANbox® 5000 Series Fibre Channel switch, firmware version 6.7. Table 1-1describes the SANbox 5000 Series switch models and their distinguishing features.

Table 1-1. SANbox 5000 Series Switch Models

Model	1-Gbps/2-Gbps	1/2/4-Gbps	Dual Replaceable
			Power Supplies
5200	✔
5202	✔		✔
5600		✔
5602		✔	✔

This manual is organized as follows:

„Section 1 describes the intended audience, related materials, safety notices, communications statements, laser safety information, electrostatic discharge sensitivity precautions, accessible parts, general program license, and technical support.

„Section 2 is an overview of the switch. It describes indicator LEDs and all user controls and connections.

„Section 3 describes the factors to consider when planning a fabric.

„Section 4 explains how to install and configure the switch.

„Section 5 describes the diagnostic methods and troubleshooting procedures.

„Section 6 describes the removal and replacement of field replaceable units. This includes media transceivers for all models and power supplies for switch models 5202 and 5602.

„Appendix A lists the switch specifications.

Please read the communications statements and laser safety information later in this section.

59096-04 A 1-1