Section Installation | Q-Logic 5000 manual

3.7.1	Connection Security	3-17
3.7.2	User Account Security	3-17
3.7.3	Port Binding	3-18
3.7.4	Device Security	3-19
3.7.4.1	Security Example: Switches and HBAs with Authentication . . . .	3-20
3.7.4.2	Security Example: RADIUS Server	3-23
3.7.4.3	Security Example: Host Authentication	3-27
3.8	Fabric Management	3-29

Section 4	Installation
4.1	Site Requirements	4-1
4.1.1	Fabric Management Workstation	4-2
4.1.2	Switch Power Requirements	4-2
4.1.3	Environmental Conditions	4-2
4.2	Installing a Switch	4-3
4.2.1	Mount the Switch	4-4
4.2.2	Install Transceivers	4-6
4.2.3	Configure the Workstation	4-8
4.2.3.1	Configuring the Workstation IP Address for Ethernet Connections	4-8
4.2.3.2	Configuring the Workstation Serial Port	4-9
4.2.4	Connect the Workstation to the Switch	4-10
4.2.5	Connect the Switch to AC Power	4-11
4.2.6	Configure the Switch	4-14
4.2.7	Cable Devices to the Switch	4-16
4.3	Installing Firmware	4-16
4.3.1	Using QuickTools to Install Firmware	4-18
4.3.2	Using the CLI to Install Firmware	4-18
4.3.2.1	One-Step Firmware Installation	4-18
4.3.2.2	Custom Firmware Installation	4-20
4.4	Adding a Switch to an Existing Fabric	4-21
4.5	Installing Feature License Keys	4-21

Section 5	Diagnostics/Troubleshooting
5.1	Chassis Diagnostics	5-1
5.1.1	Input Power LED Is Extinguished	5-2
5.1.2	System Fault LED Is Illuminated	5-2
5.2	Power-On Self Test Diagnostics	5-3

59096-04 A

Page v

Q-Logic 5000 manual Section Installation