Quatech INTERBUS S manual SSIencoder

SSI Encoder Interface

PN 750-630, 750-630/000-001, 750-630/000-006

Technical Description:

This technical description is only valid for hardware and software versions

X X X X 2 B 0 2----. The product series number is printed on the right side of the

module.

The operational mode of the module is factory preset to discern a 24 bit absolute encoder Graycode signal transmitted at 125kHz.

The following description is preliminary and is applicable to the factory configuration.

Attention:

The lowest power jumper contact is not carried out for some modules (e.g. 4-channel)! A module which needs all contacts (e.g. 2 channel digital) may not be connected to the right hand side of modules which do not have 3 power jumper contacts (e.g. 4 channel modules).

The SSI Interface is able to run with all WAGOÇI/OÇSYSTEM bus-couplers (except for the economy type).

SSI￿￿￿￿￿￿￿￿encoder 750-630 1

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿:$*2Ç,￿2Ç6<67(0