Quatech INTERBUS S manual Explanation of symbols used, The user is most important to us

IMPORTANT!

For fast, trouble free installation and start up of the devices described in this manual, the user should carefully read and follow the advice and explanations offered in this guide.

Explanation of symbols used:

The EXCLAMATION POINT symbol is used when:

a)improper handling could cause damage or destruction of the hard- or software

b)possible injury to persons when interfacing to dangerous process peripherals.

The FINGER symbol describes routines or gives advice for the efficient use of the devices and optimization of the software.

FUNCTION The FUNCTION symbol refers to helpful notes which are necessary for the correct function. These remarks should be followed.

The QUESTION MARK gives an explanation of terms.

The symbol BOOKS gives references to additional literature, manuals and data sheets.

The user is most important to us:

We place great importance on the quality and user-friendliness of our manuals. Should you have any ideas or suggestions for improvement to the contents or graphical design, we would be glad to receive your proposals.

Notice:

This manual, including all illustrations, is copyrighted. Any use of this manual beyond the terms of copyright is not allowed. The reproduction, translation, or use of the electronic and mechanical information is subject to written authorization from WAGO Kontakttechnik GmbH. Violations will be prosecuted. WAGO Kontakttechnik GmbH reserves the right of alternation and changes. All rights in case of granting patents or protective rights are reserved to WAGO Kontakttechnik GmbH.

In the case of non-WAGO products no reference to patent rights is given, but their existence is noted. The use of the products described in this manuals exclusively intended for experts trained in PLC programming or electrical engineering, who are familiar with the national electrical standards in force. WAGO Kontakttechnik GmbH and overseas subsidiaries will not accept any liability for faulty actions and damages which occur on WAGO or non-WAGO products when disregarding the information given in this manual. Any change made in WAGO hard or software (for example entries in a register) will result in an exclusion of liability on the part of WAGO Kontakttechnik GmbH.

INTERBUS S / General information 1

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿:$*2Ç,￿2Ç6<67(0