Quatech INTERBUS S manual Interbus S / Configuration

2) Ident code

Ill. 12: Insertion of the WAGO I/O System via the Ident code

For manual configuration, the menu item „bus structure“ in the configuration screen must be selected. You will then see Ill. 12.

The corresponding ID code of table 3 and the length of the process data channel must be indicated in the selected submenu. The length is dependent on the module with the largest data length.

INTERBUS S / Configuration 17

￿￿￿￿￿￿￿ ￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿:$*2Ç,￿2Ç6<67(0