![](/images/new-backgrounds/1272887/27288765x1.webp)
Canceling a Memory Transmission
Canceling a Memory Transmission
Before the Start Key is Pressed
A Press the {Energy Saver / Clear Modes}
key.
Note
❒When you have already set the original, you can also cancel the transmission by removing the original from the machine.
During Transmission
Use this procedure to cancel a trans- mission after the original has been
scanned.2
Note
❒If transmission finishes while you are carrying out this procedure, it will not be canceled.
❒If you cancel a message while it is being sent, transmission is halted as soon as you finish this proce- dure. However, some pages of your message may have already been sent and will be received at the other end.
A Press the {Job Information} key, and confirm that " 1. Cancel TX / RX " is displayed.
While the Original is Being
Scanned
A Press the {Clear/Stop} key.
The Information menu is shown.
B Press the {OK } key.
The machine will stop storing the original and the data will not be sent.
27