Troubleshooting When Using the Facsimile Function
Note
❒If the “Check whether there are any network problems.” message ap- pears, the machine is not correctly connected to the network or the settings of
the machine are not correct. If you do not need to connect to a network, you can specify the setting so this message is not displayed, and then the {Facsim- ile} key no longer lights. See “Parameter Settings”, General Settings Guide. If you reconnect the machine to the network, be sure to set “Display” with User Parameters.
❒If the paper tray runs out of paper, “No paper. Load it. then press [Ex- it].” appears on the display, asking you to add more paper. If there is paper
3 | left in the other trays, you can receive documents as usual, even if the mes- |
| sage appears on the display. You can turn this function on or off with “Param- |
eter Setting”. See “Parameter Settings”, General Settings Guide.
Reference
“Connecting to the Ethernet Interface”, General Settings Guide
“File Transfer”, General Settings Guide
“Parameter Settings”, General Settings Guide
34