6
Adding Paper, Toner and Staples
Changing to a size that is not indicated on the paper size selector
If you load a paper size that is not indicated on the paper size selector, you need to specify the paper size with the control panel. This section describes how to load such paper.
A Set the paper size selector to the p mark.
B Press the {User Tools/Counter} key.
C Press [System Settings].
D Press [Tray Paper Settings].
E Press [Tray Paper Size: Tray 1], [Tray Paper Size: Tray 2], [Tray Paper Size: Tray 3] or [Tray Paper Size: Tray 4].
F Select the required size, and then press [OK].
G Press [Exit] or the {User Tools/Counter} key to exit User Tools.
80