When a Message Is Displayed

Alert Messages

This section describes the machine Alert messages.

Message

Cause

Solution

 

 

 

 

 

IEEE 802.11b

• IEEE 802.11b inter-

Turn off the machine and check that the

 

 

(Wireless LAN)

face unit was not in-

IEEE 802.11b interface unit is inserted

 

has a problem.

serted when the

correctly. Then, turn the machine on

 

 

machine was turned

again. If the message appears again,

 

 

on, or it was pulled

contact your service representative.

 

 

out after the machine

 

 

 

 

turned on.

 

 

 

 

• The settings are not

 

 

 

 

updated although the

 

 

 

 

unit is detected, or er-

 

 

 

 

 

 

4

 

rors are found while

 

 

 

 

 

accessing the unit.

 

 

 

 

 

 

 

HDD has a prob-

An error has occurred in

Turn off the main power switch, and back

 

 

lem.

the hard disk drive.

on again. If the message appears again,

 

 

 

contact your service representative.

 

 

 

 

 

USB has a prob-

An error has occurred in

Turn off the main power switch, and back

 

 

lem.

the USB interface.

on again. If the message appears again,

 

 

 

contact your service representative.

 

 

 

 

 

Ethernet board

An error has occurred in

Turn off the main power switch, and back

 

 

has a problem.

the Ethernet board.

on again. If the message appears again,

 

 

 

contact your service representative.

 

 

 

 

 

You do not have

This user code is not al-

Contact the administrator.

 

 

the privileges to

lowed to use the function

 

 

 

use this func-

selected.

 

 

 

tion.

 

 

 

 

 

 

 

 

You do not have

This user code is not al-

If the message continues to be displayed

 

 

the privileges to

lowed to use the function

and you cannot switch the screen, press

 

use this func-

selected.

the {Energy Saver}key. Confirm that the

 

tion.

 

display goes off, and then press the {En-

 

 

ergy Saver} key again. The display will

 

 

 

 

 

 

 

return to the user code entry display.

 

 

 

When printing under the copier or

 

 

 

printer function, press the {Energy Sav-

 

 

 

er} key only after printing has finished.

 

 

 

 

 

Authentication

The entered login user

Inquire the user administrator for the cor-

 

 

has failed.

name or login password

rect login user name and login password.

 

 

is not correct.

 

 

 

 

 

 

 

Authentication

The machine cannot per-

Contact the administrator.

 

 

has failed.

form authentication.

 

 

 

 

 

 

 

 

47