Ricoh 3224C, 3232C, ISC1024c, ISC1032c If You Cannot Make Copies As You Want

If You Cannot Make Copies As You Want

If You Cannot Make Copies As You Want

This section explains causes of, and remedies for, unexpected copy results.

❖ Basic

Problem	Causes	Solutions
Copies are not stapled.	There are jammed staples	Remove jammed staples. See “Re-
	in the stapler.	moving Jammed Staples”General
		Settings Guide.

		Note
		❒ After removing jammed staples,
		staples might not eject the first
		few times you try to use the sta-	4
		pler.
	The number of copies ex-	Check the stapler capacity. See p.127
	ceeds stapler capacity.	“Staple”.
	Copy paper is curled.	Turn the copy paper over in the
		tray.
Staples are wrongly posi-	Originals are not placed	Check originals are placed in the
tioned.	correctly.	correct position. See p.46 “Staple”.
You cannot combine sever-	Selected functions cannot	Check the combination of functions
al functions.	be used together.	and make the settings again.
		See p.123 “Combination Chart”.
When sorting, the pages	The memory became full in	You can interrupt copying when
are divided into two	the middle of sorting and	memory becomes full. See p.120
blocks.	the pages were delivered in	“Memory Full Auto Scan Restart”.
	two blocks.
Paper does not output dur-	If you stop printing while	Press the {Clear Modes} key and can-
ing printing with stapling.	using the staple function,	cel copy settings, including stapling.
	sheets not stapled during
	printing may be left in the
	staple unit.
Colours changed even	If colour range is set to	Adjust the colour range by setting
though they were not se-	“Wider” and if red is select-	the colour width. See p.120 “Adjust
lected.	ed, colours such as magen-	Colour Image”.
	ta and orange may change.
Colours not selected will be	If colour range is set to	Adjust the colour range by setting
erased when using Erase	“Wider” and if red is select-	the colour width. See p.120 “Adjust
mode.	ed, colours such as magen-	Colour Image”.
	ta and orange may change.

95