Copying
2
Note
❒You can enter sizes within the following ranges:
Metric | |
version | (increments of 1 mm) |
|
|
Inch | |
version | (increments of 0.1") |
|
|
E Enter the length of the copy using the number keys, and then press [#].
Note
❒To change the length after press- ing [#], select [Original] or [Copy], and then enter the length.
A Press [Reduce / Enlarge].
B Press [Specifd. Ratio].
C Press [Direct. Mag.%].
To enter the ratio using the number keys
40
F Press [OK] twice.
G Place the originals, and then press the {Start} key.
Directional Magnification (%)
Copies can be reduced or enlarged at different reproduction ratios, horizontally and vertically.
CP2P01EE
a:Horizontal ratio
b:Vertical ratio
Note
❒You can also select a preset ratio close to the ratio using [Reduce] or [Enlarge], and then adjust it further, using [n] or [o].
APress [Horizontal].
BEnter the ratio using the number keys, and then press [#].
CPress [Vertical].
DEnter the ratio using the number keys, and then press [#].
EPress [OK].
To specify a ratio using [n] and
[o]
APress [With no].
BPress [Horizontal].
CAdjust the ratio using [n] or [o].
Note
❒Pressing [n] or [o] changes the ratio in increments of 1%. Pressing and holding down [n] or [o] changes it in in- crements of 10%.
❒If you have incorrectly en- tered the ratio, readjust it us- ing [n] or [o].
DPress [Vertical].
EAdjust the ratio using [n] or
[o].
FPress [OK].